Charge and Store Lockers for Laptops etc

Product Information

These Lapbox charge and store lockers are most suitable for laptops and similiar electronic items, Available with a singewl door or individual compartment doors offering a secure way to store only or charge and store your tablets, phones, IT equipment, laptops, smart devices, netbooks etc. Widely used in all education establishments including schools, colleges and universities and the NHS.

FREE DESIGN SERVICE - if you're not sure what to order then let us do the work for you - just send us a rough sketch of your room to sales@rh-products.co.uk and we will send you back a design layout together with a quotation, without obligation.

FREE SITE VISIT - If you would prefer a site visit to your premises to access your requirements we would be pleased to arrange this, without obligation

Available with or without a standard 3 pin power sockets in three models with 8, 10 or 15 compartments with solid or vision panel doors. Power sockets are also available with or without a USB port.

All models are fire tested and approved in line with European Standards. All lockers comply with the requirements set out in Building Bulletin 100: Design for fire safety in schools.

Safe location of the power socket and all charging units are CE marked. All compartments have scratch resistant lock covers with the facility to number each door to help identification. Each charging compartment has a rear perforated panel for heat dissipation
Height:
8 doors or single door with 8 compartments = 1000mm high
10 doors or single door with 10 compartments = 1780mm high

• Maximum device dimension = 315mm x 420mm
• Lockers manufactured in the UK to the highest standards and meets BS 4680:1996
• Fire tested and approved in line with European Standard EN 13501-1:2007+A1:2009
• They comply with the requirements set out in Building Bulletin 100: Design for fire safety in schools
• Each charging compartment has a rear perforated panel for heat dissipation
• Fitted with Cam Lock as standard or Twist Lock suitable for padlock on request, (padlock not supplied)
• Price Inc 3 point Locking only If Cam Lock Specified
• Standard cam lock has a micro sprung 10 disc lock featuring a massive 3000 serial combinations
• Twist lock (on request at same price) aattractive design allowing easy use of padlock fitting. Shank diameter maximum 7mm and minimum 5mm.
• Strong steel locker construction with welded front frame and internal door strengtheners
• Lockers fitted with 5 knuckle hinges
• Each metal locker has an integral air vent system
• Powder coated with a hard-wearing anti-bacterial finish for the most stringent hygienic environment.
• Charge and store lockers have a white carcass with doors finished in Red, Blue, White and Orange.
• Guaranteed for 12 months
• For locker quantity discounts please as us for a special price

Locker dimensions	mm
Width	380
Depth (Non Charging)	460
Depth (Charging)	525
Height	1000, 1780

To help you make your perfect colour choice, colour swatches are available on request. Please note lockers are made especially to your request and cannot be cancelled once ordered. Lockers are also non-returnable unless damaged or faulty.